High Quality Transparent Clicktight COB LED Strip Connector

• Customization: Available
• Transport Package: Paper Carton
• Trademark: Easing Home
• Origin: P. R. China
• HS Code: 9405409000
• Production Capacity: 1000PCS Per Day

Product Description

The LED strip connectors in this guide will help you to:

1. Connect two strips together, end-to-end to make a longer length
2. Run a gap in between your strip lights
3. Connect power leads to an LED strip
4. Make small connections around corners

Connecting to LED Strips
 

1. Make sure to lift the clear plastic cover and slide the strip in until it hits the backstop, it should sit under the lowest clear tab as shown in the picture.
2. Once it is in as far as it will go, push the tab down making sure each side clicks into place.
3. Once you click it down the teeth should pierce up through the bottom of the copper pads on the strip, making for a solid connection. I lifted the tab here to show you how the teeth pierce the copper connection points.

Connecting Strip Connector to Wire

These solderless connectors work best with 20 AWG stranded wire. There is no need to strip the wires before connecting.

1. Make sure to lift the clear cover and slide the wires in as far as they can. Make sure you color code your wires or make sure they all line up. We use red for positive and black for negative. RGB connectors will have 4 wires as stated earlier.
2. Once the wires are sitting above the grooves click the cap down. For the wire side it is best to use a set of pliers to help click the connector down all the way, it takes some force!
3. If you're having trouble with wires moving around, try first pushing the wires into the slots a little more so they do not move when you try to clip the cap down.
4. You now have a solid connection to wires and can run them to your power source or to another section of strip!

Strip-to-Strip Connection