Description:
1.Material: Aluminium alloy 6063.
2.Quality standard: DIN; AAMA; AS/NZS; CHINAGB.
3.Surface treatment: Mill finish, anodized, powder coated, wood grain, polished, brushed, electrophoresis, etc.
4.Color avalilable: Silver Black White.
5.Packing details: Shrinking film; Plastic & kraft paper; Wooden pallet
Carton packing; By customer's requirements.
6.Samples Time: Normally, 8 working days.
7.Delivery:15 days for mass production.
8.Production Capacity: 6000MT/Month
9.MOQ: It's based on the drawings. Basically, it's 2 tons.
10.Port: Shenzhen; As per requested.
It suits for creative cove lighting design, it is dry-wall designed with white body, which will give very beautiful light from the strip inside.Anti-glare, which has no harm to the human eye, but gives very soft and uniform light. That will be nice choice for hotel ceiling or other high-end lighting design. high quaity extruded aluminum housing and die-cast aluminum end caps.
Technical Data:
| Part Number: |
APT0501 |
Length: |
1M, 2M. 3M cutomized length accepted |
Advantage:
Dry-wall cove LED profile perfectly inseting Lighting into the ceiling and wall. good choice for hotel, restaurant, commecical light ect. |
| Type: |
For ceiling floor |
Accessory: |
End cap |
| Housing material: |
PC diffuser+ high-quality Aluminum alloy |
Connection |
n/a |
| Diffuser material: |
PC diffuser |
IP Rate: |
IP67 waterproof |
| Housing color: |
Siver, white, black optional |
Warranty: |
3years |
| |
| Light source |
SMD |
CRI: |
Ra 80 |
| CCT: |
Warm white, White, Red,Green,Blue, Yellow, Pink, Purple, RGB, RGBW, CCT, RGB+CCT |
Input Voltage: |
DC 12V / DC 24V |
| Dimming type: |
|
Power: |
|
| Cable method: |
bottom, end or side cable out |
Lead time: |
8 working days |
Installation:
Step1: Firstly, take off strip's 3M tape and stick led strip onto aluminum plate. Then insert aluminum plate into APT0501 and APT1501 Profile.
Step 2: Firstly dig a groove on wood Board or Floor, whose size match with APT0501 and APT1501 Aluminum base's size. Then install Aluminum base into the groove.
Step 3: Insert LED profile into fixed aluminum base ( Press it into aluminum base from the top)
Step 4: Finally install End caps at both side of LED Profile.
Application:
){kind=link}
){kind=link}